Part Number Hot Search : 
MIC74BQS 14100 E15030 74F82 74F82 90903 3705Z A1SX80
Product Description
Full Text Search
 

To Download LED40W-100-C0400-HL-XY Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  led-40w hl seriesC hazardous location, fixed output and dimmable switch mode led drivers constant current & constant voltage with isolation black magic thermal advantage? plastic housing ordering options: -d: dimmable model dims 100-10%. two extra wires on the output side: +purple/-gray. it offers 0-10v & resistance dimming, compatible with most quality 0-10v dimmers. see page 3. -p: pwm dimmable version dims 100-10%. two extra wires on the output side: +purple/-gray. it is pwm dimmable via a positive duty cycle, 200hz to 1khz, 0-10v pulse. see page 4. electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) input over-voltage: can endure 320vac for 48 hrs, 350vac for 2 hrs frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >_ 0.90 @ >_ 60% load 100-230v, >_ 85% load 277v inrush current: <20.0 amps max @ 230 vac, cold start 25oc input current: 0.40 amps typical @ 120vac, 60hz, full load maximum power: 40w current regulation: 3% over input line variation load regulation: 4% thd: <_ 20% @ >_ 60% load 100-230v, >_ 80% load 277v leakage current: 400 a typical hold up time: half cycle output protection: over-voltage, over-current, short circuit (auto recovery) plus internal thermal protection (hiccup mode) environmental specifcations minimum starting temp: -30o maximum case temp. 90c storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5 to 55 hz/2g, 30 minutes sound rating: class a impact resistanct: 1g/s mtbf: 482,000 hrs @ full load, 40oc per mil-217f notice 2 weight: 12.9 oz (364 g) constant current - product specifcations model number current out (ma 3%) voltage out, range (vdc) power out max (w) typical effc (%) led40w-130-c0300 -hl-xy 300 44-130 40 87 led40w-114-c0350 -hl-xy 350 38-114 40 86 led40w-100-c0400 -hl-xy 400 33-100 40 86 led40w-89-c0450 -hl-xy 450 30-89 40 86 led40w-72-c0550 -hl-xy 550 24-72 40 85 led40w-54-c0700 -hl-xy 700 18-54 38 85 led40w-48-c0830 -hl-xy 830 16-48 40 85 led40w-45-c0900 -hl-xy 900 16-45 40 85 led40w-40-c1000 -hl-xy 1000 13-40 40 85 led40w-36-c1100 -hl-xy 1100 12-36 40 85 led40w-30-c1400 -hl-xy 1400 10-30 42 85 led40w-24-c1670 -hl-xy 1670 8-24 40 85 led40w-22-c1820 -hl-xy 1820 7-22 40 85 led40w-18-c2220 -hl-xy 2200 6-18 40 84 led40w-15-c2680 -hl-xy 2680 5-15 40 84 led40w-13-c3080 -hl-xy 3080 4-13 40 84 led40w-12-c3330 -hl-xy 3330 4-12 40 83 led40w-10-c4000 -hl-xy 4000 3-10 40 83 led40w-09-c4450 -hl-xy 4450 3-9 40 82 constant voltage - product specifcations model number voltage out (vdc 5%) current out range (ma) power out max (w) typical effc (%) led40w-09 -hl-x 9 1113-4450 40 87 led40w-10 -hl-x 10 1000-4000 40 86 led40w-12 -hl-x 12 825-3330 40 86 led40w-13 -hl-x 13 770-3080 40 86 led40w-15 -hl-x 15 670-2680 40 85 led40w-18 -hl-x 18 550-2200 40 85 led40w-22 -hl-x 22 455-1820 40 85 led40w-24 -hl-x 24 418-1670 40 85 led40w-30 -hl-x 30 350-1400 42 85 led40w-36 -hl-x 36 275-1100 40 85 led40w-40 -hl-x 40 250-1000 40 85 led40w-45 -hl-x 45 225-900 40 85 led40w-48 -hl-x 48 208-830 40 85 led40w-54 -hl-x 54 175-700 38 84 led40w-72 -hl-x 72 138-550 40 84 led40w-89 -hl-x 89 113-450 40 84 led40w-100 -hl-x 100 100-400 40 83 led40w-114 -hl-x 114 75-350 40 83 led40w-130 -hl-x 130 75-300 40 82 class 2: us/canada us only e332160 sign components manual -x indicates lead options. b for bottom leads, s for side leads. -y indicates dimming options are available. see options below. blank = fxed current output ? total power: 40 watts ? input voltage: 100-277 vac nom. ? ul dry & damp location rated ? ip66 ? high power factor ? ul type hl, with v5a case ? rated for hazardous locations rev 8-25-15 specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - inches (mm) standard ?-by? bottom leads configuration : ?-sy? optional side leads configuration : 0.16 [ 4 ] 1.4 [ 35.6 ] 2.8 [ 71 ] 5.91 min [ 150 min ] 0.39 [ 10.0 ] 0.390.04 [ 101 ] 1.2 [ 30.5 ] 0.39 [ 10 ] 3.78 [ 96 ] 1.89 [ 48 ] tc = 90c max 5.91 min [ 150 min ] 1.18 [ 30 ] 0.390.04 [ 101 ] 0.2 [ 5 ] 0.14 [ 3.6 ] 0.16 [ 4 ] 1.4 [ 35.6 ] 2.8 [ 71 ] 5.91 min [ 150 min ] 0.39 [ 10.0 ] 0.390.04 [ 101 ] 1.2 [ 30.5 ] 0.39 [ 10 ] 3.78 [ 96 ] 1.89 [ 48 ] tc = 90c max 1.18 [ 30 ] 0.2 [ 5 ] 0.14 [ 3.6 ] ac in white (n) black (l) dimming purple (+) gray (-) dc out red (+) blue (-) ac in white (n) black (l) dimming purple (+) gray (-) dc out red (+) blue (-) wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. 50% load pf power factor / load (led40w rev e1.1 models) 60% 70% 80% 90% 100% 50% load thd thd / load (led40w rev e1.1 models) 60% 70% 80% 90% 100% 1 20v a c 2 77v a c 1 20v a c 2 77v a c 0.50 0.55 0.70 0.65 0.60 0.75 0.90 0.85 0.80 0.95 1.00 0% 15% 10% 5% 20% 25% typical efficiency / load (led40w rev e1.1) 75% 70% 80% 85% 90% 100% 95% normalized output voltage efficiency 60% 70% 80% 90% 100% 1 20v a c 2 77v a c 45 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature (led40w rev e1.1) 0 60 90 115 75 15 30 45 130 50 55 60 65 70 75 80 85 90 ul conditions of acceptability see website for additional information safety and emc compliance ul/cul ul8750 type hl, csa-c22.2 c e en61347 fcc, 47cfr part 15 class b led40w-hl series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 notes: 1. d dimmable version comes with an extra two wires on the output side: +purple/-gray. 2. compatible with most 0-10v dimmers. recommended dimmer is leviton ip710 or equivalent. 3. d & d3 dimmable versions are not intended to dim below about 5% @ 0v or 10% @ 1.0v. 4. output will be 100% with purple/gray open and minimum with purple/gray shorted. parameters minimum typical maximum source current out of 0-10v purple wire 0 ma - 2 ma absolute voltage range on 0-10v (+) purple wire -2.0 v - +15 v dim (+) purple ip710 wall dimmer ?-d? typical dimming circuit led40w- xxx-cxxxx -hl-xd dim (-) gray (dimmer must be current-sink type control) -d option: 0-10vdc and resistance dimming 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v purple-to-gray voltage ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng control voltage 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led40w-hl series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 -pd option: pwm dimming pwm in ?-p? pwm positive dimming typical circuit led40w-xx-cxxxx -hl-xp pwm (+) purple pwm (-) gray parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +15v input low level voltage range (purple wire) -2.0 0v +5.5v input high level voltage range (purple wire) +9.0 10v +15v sink current into pwm input (purple wire) 0ma - 1.2ma pwm input signal frequency 500hz - 1500hz pwm input signal positive duty cycle 0% 10-90% 100% notes: 1. pd dimmable version comes with an extra 2 wires on the output side for pwm type dimming: +purple/-gray. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. 3. output will be 100% with purple/gray open and minimum with purple/gray shorted. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / 1.0khz positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led40w-hl series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?


▲Up To Search▲   

 
Price & Availability of LED40W-100-C0400-HL-XY

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X